7 Functions ¶

Functions are reusable pieces of programs. They allow you to give a name to a block of statements, allowing you to run that block using the specified name anywhere in your program and any number of times. This is known as calling the function. We have already used many built-in functions such as len and range .

The function concept is probably the most important building block of any non-trivial software (in any programming language), so we will explore various aspects of functions in this chapter.

Functions are defined using the def keyword. After this keyword comes an identifier name for the function, followed by a pair of parentheses which may enclose some names of variables, and by the final colon that ends the line. Next follows the block of statements that are part of this function. An example will show that this is actually very simple:

Example:

In [1]:

def say_hello():
    # block belonging to the function
    print('hello world')
# End of function

say_hello()  # call the function
say_hello()  # call the function again

def say_hello(): # block belonging to the function print('hello world') # End of function say_hello() # call the function say_hello() # call the function again

hello world
hello world

How It Works

We define a function called say_hello using the syntax as explained above. This function takes no parameters and hence there are no variables declared in the parentheses. Parameters to functions are just input to the function so that we can pass in different values to it and get back corresponding results.

Notice that we can call the same function twice which means we do not have to write the same code again.

Function Parameters ¶

A function can take parameters, which are values you supply to the function so that the function can do something utilising those values. These parameters are just like variables except that the values of these variables are defined when we call the function and are already assigned values when the function runs.

Parameters are specified within the pair of parentheses in the function definition, separated by commas. When we call the function, we supply the values in the same way. Note the terminology used - the names given in the function definition are called parameters whereas the values you supply in the function call are called arguments .

Example (save as function_param.py ):

In [2]:

def print_max(a, b):
    if a > b:
        print(a, 'is maximum')
    elif a == b:
        print(a, 'is equal to', b)
    else:
        print(b, 'is maximum')

# directly pass literal values
print_max(3, 4)

x = 5
y = 7

# pass variables as arguments
print_max(x, y)

def print_max(a, b): if a > b: print(a, 'is maximum') elif a == b: print(a, 'is equal to', b) else: print(b, 'is maximum') # directly pass literal values print_max(3, 4) x = 5 y = 7 # pass variables as arguments print_max(x, y)

4 is maximum
7 is maximum

How It Works

Here, we define a function called print_max that uses two parameters called a and b . We find out the greater number using a simple if..else statement and then print the bigger number.

The first time we call the function print_max , we directly supply the numbers as arguments. In the second case, we call the function with variables as arguments. print_max(x, y) causes the value of argument x to be assigned to parameter a and the value of argument y to be assigned to parameter b . The print_max function works the same way in both cases.

Local Variables ¶

When you declare variables inside a function definition, they are not related in any way to other variables with the same names used outside the function - i.e. variable names are local to the function. This is called the scope of the variable. All variables have the scope of the block they are declared in starting from the point of definition of the name.

Example (save as function_local.py ):

In [3]:

x = 50


def func(x):
    print('x is', x)
    x = 2
    print('Changed local x to', x)


func(x)
print('x is still', x)

x = 50 def func(x): print('x is', x) x = 2 print('Changed local x to', x) func(x) print('x is still', x)

x is 50
Changed local x to 2
x is still 50

How It Works

The first time that we print the value of the name x with the first line in the function's body, Python uses the value of the parameter declared in the main block, above the function definition.

Next, we assign the value 2 to x . The name x is local to our function. So, when we change the value of x in the function, the x defined in the main block remains unaffected.

With the last print statement, we display the value of x as defined in the main block, thereby confirming that it is actually unaffected by the local assignment within the previously called function.

The global statement ¶

If you want to assign a value to a name defined at the top level of the program (i.e. not inside any kind of scope such as functions or classes), then you have to tell Python that the name is not local, but it is global . We do this using the global statement. It is impossible to assign a value to a variable defined outside a function without the global statement.

You can use the values of such variables defined outside the function (assuming there is no variable with the same name within the function). However, this is not encouraged and should be avoided since it becomes unclear to the reader of the program as to where that variable's definition is. Using the global statement makes it amply clear that the variable is defined in an outermost block.

Example (save as function_global.py ):

In [4]:

x = 50


def func():
    global x

    print('x is', x)
    x = 2
    print('Changed global x to', x)


func()
print('Value of x is', x)

x = 50 def func(): global x print('x is', x) x = 2 print('Changed global x to', x) func() print('Value of x is', x)

x is 50
Changed global x to 2
Value of x is 2

How It Works

The global statement is used to declare that x is a global variable - hence, when we assign a value to x inside the function, that change is reflected when we use the value of x in the main block.

You can specify more than one global variable using the same global statement e.g. global x, y, z .

Default Argument Values ¶

For some functions, you may want to make some parameters optional and use default values in case the user does not want to provide values for them. This is done with the help of default argument values. You can specify default argument values for parameters by appending to the parameter name in the function definition the assignment operator ( = ) followed by the default value.

Note that the default argument value should be a constant. More precisely, the default argument value should be immutable - this is explained in detail in later chapters. For now, just remember this.

Example (save as function_default.py ):

In [5]:

def say(message, times=1):
    print(message * times)

say('Hello')
say('World', 5)

def say(message, times=1): print(message * times) say('Hello') say('World', 5)

Hello
WorldWorldWorldWorldWorld

How It Works

The function named say is used to print a string as many times as specified. If we don't supply a value, then by default, the string is printed just once. We achieve this by specifying a default argument value of 1 to the parameter times .

In the first usage of say , we supply only the string and it prints the string once. In the second usage of say , we supply both the string and an argument 5 stating that we want to say the string message 5 times.

CAUTION

Only those parameters which are at the end of the parameter list can be given default argument values i.e. you cannot have a parameter with a default argument value preceding a parameter without a default argument value in the function's parameter list.

This is because the values are assigned to the parameters by position. For example, def func(a, b=5) is valid, but def func(a=5, b) is not valid .

Keyword Arguments ¶

If you have some functions with many parameters and you want to specify only some of them, then you can give values for such parameters by naming them - this is called keyword arguments - we use the name (keyword) instead of the position (which we have been using all along) to specify the arguments to the function.

There are two advantages - one, using the function is easier since we do not need to worry about the order of the arguments. Two, we can give values to only those parameters to which we want to, provided that the other parameters have default argument values.

Example (save as function_keyword.py ):

In [6]:

def func(a, b=5, c=10):
    print('a is', a, 'and b is', b, 'and c is', c)

func(3, 7)
func(25, c=24)
func(c=50, a=100)

def func(a, b=5, c=10): print('a is', a, 'and b is', b, 'and c is', c) func(3, 7) func(25, c=24) func(c=50, a=100)

a is 3 and b is 7 and c is 10
a is 25 and b is 5 and c is 24
a is 100 and b is 5 and c is 50

How It Works

The function named func has one parameter without a default argument value, followed by two parameters with default argument values.

In the first usage, func(3, 7) , the parameter a gets the value 3 , the parameter b gets the value 7 and c gets the default value of 10 .

In the second usage func(25, c=24) , the variable a gets the value of 25 due to the position of the argument. Then, the parameter c gets the value of 24 due to naming i.e. keyword arguments. The variable b gets the default value of 5 .

In the third usage func(c=50, a=100) , we use keyword arguments for all specified values. Notice that we are specifying the value for parameter c before that for a even though a is defined before c in the function definition.

VarArgs parameters ¶

Sometimes you might want to define a function that can take any number of parameters, i.e. var iable number of arg uments, this can be achieved by using the stars (save as function_varargs.py ):

In [7]:

def total(a=5, *numbers, **phonebook):
    print('a', a)
    
    #iterate through all the items in tuple
    for single_item in numbers:
        print('single_item', single_item)
        
    #iterate through all the items in dictionary    
    for first_part, second_part in phonebook.items():
        print(first_part,second_part)

total(10,1,2,3,Jack=1123,John=2231,Inge=1560)

def total(a=5, *numbers, **phonebook): print('a', a) #iterate through all the items in tuple for single_item in numbers: print('single_item', single_item) #iterate through all the items in dictionary for first_part, second_part in phonebook.items(): print(first_part,second_part) total(10,1,2,3,Jack=1123,John=2231,Inge=1560)

a 10
single_item 1
single_item 2
single_item 3
Jack 1123
John 2231
Inge 1560

How It Works

When we declare a starred parameter such as *param , then all the positional arguments from that point till the end are collected as a tuple called 'param'.

Similarly, when we declare a double-starred parameter such as **param , then all the keyword arguments from that point till the end are collected as a dictionary called 'param'.

We will explore tuples and dictionaries in a later chapter .

The return statement ¶

The return statement is used to return from a function i.e. break out of the function. We can optionally return a value from the function as well.

Example (save as function_return.py ):

In [8]:

def maximum(x, y):
    if x > y:
        return x
    elif x == y:
        return 'The numbers are equal'
    else:
        return y

print(maximum(2, 3))

def maximum(x, y): if x > y: return x elif x == y: return 'The numbers are equal' else: return y print(maximum(2, 3))

3

How It Works

The maximum function returns the maximum of the parameters, in this case the numbers supplied to the function. It uses a simple if..else statement to find the greater value and then returns that value.

Note that a return statement without a value is equivalent to return None . None is a special type in Python that represents nothingness. For example, it is used to indicate that a variable has no value if it has a value of None .

Every function implicitly contains a return None statement at the end unless you have written your own return statement. You can see this by running print(some_function()) where the function some_function does not use the return statement such as:

In [9]:

def some_function():
    pass

def some_function(): pass

The pass statement is used in Python to indicate an empty block of statements.

TIP: There is a built-in function called max that already implements the 'find maximum' functionality, so use this built-in function whenever possible.

DocStrings ¶

Python has a nifty feature called documentation strings , usually referred to by its shorter name docstrings . DocStrings are an important tool that you should make use of since it helps to document the program better and makes it easier to understand. Amazingly, we can even get the docstring back from, say a function, when the program is actually running!

Example (save as function_docstring.py ):

In [10]:

def print_max(x, y):
    '''Prints the maximum of two numbers.

    The two values must be integers.'''
    # convert to integers, if possible
    x = int(x)
    y = int(y)

    if x > y:
        print(x, 'is maximum')
    else:
        print(y, 'is maximum')

print_max(3, 5)
print(print_max.__doc__)

def print_max(x, y): '''Prints the maximum of two numbers. The two values must be integers.''' # convert to integers, if possible x = int(x) y = int(y) if x > y: print(x, 'is maximum') else: print(y, 'is maximum') print_max(3, 5) print(print_max.__doc__)

5 is maximum
Prints the maximum of two numbers.

    The two values must be integers.

How It Works

A string on the first logical line of a function is the docstring for that function. Note that DocStrings also apply to modules and classes which we will learn about in the respective chapters.

The convention followed for a docstring is a multi-line string where the first line starts with a capital letter and ends with a dot. Then the second line is blank followed by any detailed explanation starting from the third line. You are strongly advised to follow this convention for all your docstrings for all your non-trivial functions.

We can access the docstring of the print_max function using the __doc__ (notice the double underscores ) attribute (name belonging to) of the function. Just remember that Python treats everything as an object and this includes functions. We'll learn more about objects in the chapter on classes .

If you have used help() in Python, then you have already seen the usage of docstrings! What it does is just fetch the __doc__ attribute of that function and displays it in a neat manner for you. You can try it out on the function above - just include help(print_max) in your program. Remember to press the q key to exit help .

Automated tools can retrieve the documentation from your program in this manner. Therefore, I strongly recommend that you use docstrings for any non-trivial function that you write. The pydoc command that comes with your Python distribution works similarly to help() using docstrings.

Summary ¶

We have seen so many aspects of functions but note that we still haven't covered all aspects of them. However, we have already covered most of what you'll use regarding Python functions on an everyday basis.

Next, we will see how to use as well as create Python modules.